Floor and wall mounted instrument boards, heated and heat insulated cabinets

Floor and wall mounted instrument boards, heated and heat insulated cabinets

Description
Switchboards are designed as metal structures both for floor and wall mounting and comprise of the following equipment:

Cabinets are designed as floor mounted metal cabinets and comprise of the following equipment:

The switchboard front part is covered with face plates. Such face plates may not be installed at the customer's request. The switchboards are fixed with anchor bolts.
There is a window in the cabinet door to be able to view the instrument indications without opening the door.
The switchboard shut-off valves are opened and closed to connect the instrument working cavities with impulse and drain lines.

Technical Data:

1
Controlled medium
crude oil, oil, water, air
2
Controlled parameters
pressure, vacuum
3
Climatic version and location category as per GOST 15150-69
UHL 4.1 (boards), UHL 1 (cabinets)
4
Explosion hard area category
non ex-area*, V1a
5
Pipe conduit materials
Steel 20 Steel 09G2S 12Cr18Ni9T
6
Rated pressure in the impulse line, MPa (kgs/cm2)
Pr 10 (100)
7
Nominal diameter, mm
Dn 10
8
Average service life, years
10
9
Warranty repair, months
18